Dynagen virtual Cisco
Dynagen is a front-end for use with the Dynamips Cisco router emulator. It uses an INI-like configuration file to provision Dynamips emulator networks. It takes care of specifying the right port adapters, generating and matching up those pesky NIO descriptors, specifying bridges, frame-relay, ATM switches, etc. It also provides a management CLI for listing devices, suspending and reloading instances, determining and managing idle-pc values, performing packet captures, etc.
http://dynagen.org and http://7200emu.hacki.at for the forums.
Other useful stuff: http://ardenpackeer.com/2007/07/07/how-to-set-up-a-basic-dynamips-lab-using-dynagen-part-1/
Supported hardware: http://7200emu.hacki.at/viewtopic.php?t=1831 and is listed below:
===========1700s===========
1710
Slots: 0 (available)
WIC slots: 0
CISCO1710-MB-1FE-1E (1 FastEthernet port and 1 Ethernet port, automatically used)
Note, interfaces do not use a slot designation (e.g. “f0”)
1720
Note, interfaces do not use a slot designation (e.g. “f0”)
1721
Note, interfaces do not use a slot designation (e.g. “f0”)
1750
Note, interfaces do not use a slot designation (e.g. “f0”)
1751
1760
Slots: 0 (available)
WIC slots: 2
C1700-MB-1ETH (1 FastEthernet port, automatically used)
Cards:
– WIC-1T (1 Serial port)
– WIC-2T (2 Serial ports)
– WIC-1ENET (1 Ethernet ports)
===========2600s===========
2610
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1E (1 Ethernet port, automatically used)
2611
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2E (2 Ethernet ports, automatically used)
2620
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1FE (1 FastEthernet port, automatically used)
2621
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2FE (2 FastEthernet ports, automatically used)
2610XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1FE (1 FastEthernet port, automatically used)
2611XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2FE (2 FastEthernet ports, automatically used)
2620XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1FE (1 FastEthernet port, automatically used)
2621XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2FE (2 FastEthernet ports, automatically used)
2650XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-1FE (1 FastEthernet port, automatically used)
2651XM
Slots: 1 (available)
WIC slots: 3
CISCO2600-MB-2FE (2 FastEthernet ports, automatically used)
Cards:
– NM-1E (Ethernet, 1 port)
– NM-4E (Ethernet, 4 ports)
– NM-1FE-TX (FastEthernet, 1 port)
– NM-16ESW (Ethernet switch module, 16 ports)
– NM-NAM
– NM-IDS
– WIC-1T (1 Serial port)
– WIC-2T (2 Serial ports)
===========3600s===========
3660
Slots: 6 (available)
3640
Slots: 4
3620
Slots: 2
Cards:
– NM-1E (Ethernet, 1 port)
– NM-4E (Ethernet, 4 ports)
– NM-1FE-TX (FastEthernet, 1 port)
– NM-16ESW (Ethernet switch module, 16 ports)
– NM-4T (Serial, 4 ports)
– Leopard-2FE (Cisco 3660 FastEthernet in slot 0, automatically used)
===========3700s===========
2691 (The 2691 is essentially a 3700 with 1 slot)
Slots: 1 (available)
WIC slots: 3
3725
Slots: 2 (available)
WIC slots: 3
3745
Slots: 4 (available)
WIC slots: 3
Cards:
– NM-1FE-TX (FastEthernet, 1 port)
– NM-4T (Serial, 4 ports)
– NM-16ESW (Ethernet switch module, 16 ports)
– GT96100-FE (2 integrated ports, automatically used)
– NM-NAM
– NM-IDS
– WIC-1T (1 Serial port)
– WIC-2T (2 Serial ports)
===========7200s===========
7206
Slots: 6 (available)
Chassis types:
- STD
- VXR
NPEs:
- NPE-100
- NPE-150
- NPE-175
- NPE-200
- NPE-225
- NPE-300
- NPE-400
- NPE-G2 (Requires the use of NPE-G2 IOS images)
Cards:
- C7200-IO-FE (FastEthernet, slot 0 only)
- C7200-IO-2FE (FastEthernet, 2 ports, slot 0 only)
- C7200-IO-GE-E (GigabitEthernet interface only, Ethernet not currently functional, slot 0 only)
- PA-FE-TX (FastEthernet)
- PA-2FE-TX (FastEthernet, 2 ports)
- PA-4E (Ethernet, 4 ports)
- PA-8E (Ethernet, 8 ports)
- PA-4T+ (Serial, 4 ports)
- PA-8T (Serial, 8 ports)
- PA-A1 (ATM)
- PA-POS-OC3 (POS)
- PA-GE (GigabitEthernet)
Now all I need to do is find some IOS’s to install into it!!
Ask me… happy to help ;)